diff --git a/board/wandboard/README b/board/wandboard/README
index c6c0132..6345416 100644
--- a/board/wandboard/README
+++ b/board/wandboard/README
@@ -9,7 +9,7 @@
 For more details about Wandboard, please refer to:
 http://www.wandboard.org/
 
-Building U-boot for Wandboard
+Building U-Boot for Wandboard
 -----------------------------
 
 To build U-Boot for the Wandboard:
@@ -17,7 +17,7 @@
 $ make wandboard_config
 $ make
 
-Flashing U-boot into the SD card
+Flashing U-Boot into the SD card
 --------------------------------
 
 - After the 'make' command completes, the generated 'SPL' binary must be
@@ -36,4 +36,4 @@
 
 - Connect the serial cable to the host PC
 
-- Power up the board and U-boot messages will appear in the serial console.
+- Power up the board and U-Boot messages will appear in the serial console.
diff --git a/board/wandboard/wandboard.c b/board/wandboard/wandboard.c
index ac001ed..4ce74cd 100644
--- a/board/wandboard/wandboard.c
+++ b/board/wandboard/wandboard.c
@@ -155,7 +155,7 @@
 
 	/*
 	 * Following map is done:
-	 * (U-boot device node)    (Physical Port)
+	 * (U-Boot device node)    (Physical Port)
 	 * mmc0                    SOM MicroSD
 	 * mmc1                    Carrier board MicroSD
 	 */